在SQUID心磁测量中基于奇异值分解和自适应滤波的噪声消除法

采用矩阵奇异值分解(singular value decomposition, SVD)的方法，对高温射频超导量子干涉仪(HTc rf-SQUID)采集到的单通道心磁信号进行处理.证明了对于近似周期性的心磁信号，在无参考噪声的情况下矩阵奇异值分解的方法与自适应窄带陷波相结合有较好的消除广谱噪声的效果. 关键词： 高温射频超导量子干涉仪 心磁信号 奇异值分解 噪声消除     

正相协列乘积和的重对数律与强大数律

证明了强平稳正相协列乘积和的重对数律与不同分布正相协列乘积和的强大数律,指出了部分和服从强大数律但乘积和未必服从强大数律这一事实,并讨论了定理2中一个条件的必要性．     

厚胶光刻非线性畸变的校正

利用厚胶光刻技术制作大深度微结构元件是一种有效的途径,但厚胶光刻过程中的非线性畸变对光刻面形质量的严重影响限制了该技术的应用,基于此,提出了一种对掩模透射率函数进行校正的方法。分析空间像形成及其在光刻胶内传递、曝光、显影等过程中非线性因素的影响,利用模拟退火算法对掩模透射率函数进行校正,以提高光刻面形质量,并以凹面柱透镜为例,给出了校正前后的显影轮廓模拟结果,其校正后浮雕面形的体积偏差仅为2.63%。该方法在有效改善面形质量的同时,并没有引起掩模的设计、制作难度及费用增加,这对于设计、制作高质量的微结构元件有重要意义。     

聚四氟乙烯材料表面激光改性与刻蚀

利用波长为248 nm的准分子激光束在不同激光能量密度下照射聚四氟乙烯(PTFE)材料的表面,并用扫描电镜(SEM)、X射线光电子能谱(XPS)、拉曼(Raman)光谱等手段对激光处理前后样品的表面形貌、化学成分和结构进行测量和分析,进而对激光与聚四氟乙烯相互作用的机理进行了研究。实验结果表明,激光辐照使聚四氟乙烯表面产生去氟效应,导致表面碳化、分子链的交联以及含氧基团的产生,随着激光能量密度的增加,C=C双键逐渐形成。这些结构的变化可以导致表面硬度和粘结性增强。激光能量密度的大小对照射后样品表面的物理性质和化学结构有着重要的影响,它是聚合物表面激光改性和烧蚀的关键因素。     

具常数特征拟线性双曲型方程组Cauchy问题

考虑具常数特征拟线性双曲型方程,提出一个新的可化约方程组的方法,证明了具常特征方程组Cauchy问题经典解的整体存在性定理.同时构造一些例子说明一些有趣的现象.     

Preparation, characterization and photocatalytic activity of polycrystalline Bi2O3/SrTiO3 composite powders

Bi₂O₃/SrTiO₃ composite powders have been prepared and their photocatalytic activities were investigated by photooxidation of methanol. These powders were characterized by UV-Visible diffuse reflectance spectra, SEM and X-ray diffraction (XRD). The results revealed that all the Bi₂O₃/SrTiO₃ composite powders exhibited higher photocatalytic activity than pure SrTiO₃, Bi₂O₃ and TiO₂ (P25) under visible light irradiation (λ>440 nm). The effects of the Bi₂O₃ contents on the photocatalytic activities of the composite powders were examined, the photocatalytic activities increased with the content of Bi₂O₃ increasing to a maximum of 83% and then decreased under visible light irradiation. The effects of the calcination temperatures on the photocatalytic activities of the composite powders were also investigated.     

Influence of focusing depth on the microfabrication of waveguides inside silica glass by femtosecond laser direct writing

We studied the influence of focusing depth on the index change threshold and damage threshold of silica glass irradiated by a focused 120 fs laser beam. Both thresholds increased with the focusing depth. The aspect ratio of the waveguide cross section can be selected by changing the focusing depth. A 5 mm long waveguide was written at the depth of 2100 μm, which was single mode at 632.8 nm and exhibited propagation loss of 0.56 dB/cm. The refractive index change was calculated to be ∼2.47×10^-3. The influence of the focusing depth should be considered in multi-layer devices as shown in the fabrication of a 3×3 waveguide array. PACS 42.62.-b; 42.82.Et; 81.05.Kf     

A Genus-3 Topological Recursion Relation

In this paper, we give a new genus-3 topological recursion relation for Gromov-Witten invariants of compact symplectic manifolds. This formula also applies to intersection numbers on moduli spaces of spin curves. A by-product of the proof of this formula is a new relation in the tautological ring of the moduli space of 1-pointed genus-3 stable curves. Research of the first author was partially supported by NSF grant DMS-0204824 Research of the second author was partially supported by NSF grant DMS-0505835     

Stowage planning in maritime container transportation

We consider a stowage-planning problem of arranging containers on a container ship in the maritime transportation system. Since containers are accessible only from the top of the stack, temporary unloading and reloading of containers, called shifting, is unavoidable if a container required to be unloaded at the current port is stacked under containers to be unloaded at later ports on the route of the ship. The objective of the stowage planning problem is to minimize the time required for shifting and crane movements on a tour of a container ship while maintaining the stability of the ship. For the problem, we develop a heuristic solution method in which the problem is divided into two subproblems, one for assigning container groups into the holds and one for determining a loading pattern of containers assigned to each hold. The former subproblem is solved by a greedy heuristic based on the transportation simplex method, while the latter is solved by a tree search method. These two subproblems are solved iteratively using information obtained from solutions of each other. To see the performance of the suggested algorithm, computational tests are performed on problem instances generated based on information obtained from an ocean container liner. Results show that the suggested algorithm works better than existing algorithms.